Description

Buy O/S Front Fog Light – 1K0941700C in the US – Genuine Volkswagen Parts in Stock

Product Overview

The offside (O/S) front fog light—identified by the official factory part number 1K0941700C—is a vital safety and illumination component located on the right-hand side of the vehicle’s front bumper (driver’s side on US right-hand drive vehicles). Engineered specifically to improve visibility during adverse weather conditions, this genuine Volkswagen front fog lamp cuts through heavy fog, mist, driving rain, and snow without causing hazardous reflective glare.

As an authentic OEM (Original Equipment Manufacturer) component, this fog light offers an exact structural fit, factory-correct electrical connector pinning, and optimized light dissipation. Whether you are an independent garage replacing a cracked lamp assembly to pass an MOT test, a fleet manager restoring vehicle safety, or a DIY car owner completing a routine vehicle upgrade, fitting an authentic factory unit ensures uncompromised reliability and legal compliance on US roads.

Compatibility & Fitment

Exact automotive fitment is critical when replacing forward-facing lighting assemblies to avoid gaps between the lens and bumper trim, unsealed electrical connections, or poor light beam alignment. This specific part number is designed for several highly popular mid-size vehicle platforms within the Volkswagen family.

• OEM Part Number Reference: 1K0941700C (Also written as 1K0 941 700 C)

• Placement on Vehicle: Front Bumper, Right-Hand Side (Offside / Driver Side US)

• Bulb Specification: Factory standard halogen fitting (Check your vehicle manual for specific bulb renewals)

Compatible Volkswagen Models:

• Golf: MK5 variants (including hatchback, estate, and select GTI/GTD/Plus platform trim levels)

• Jetta: MK5 saloon models (typically spanning 2005–2010)

• Passat: B6 generation models (select bumper trim configurations)

Important Fitment Check: Bumper designs vary significantly between model years, face-lift revisions, and sports trim packages (such as R-Line or individual GTI designs). To guarantee absolute compatibility with your vehicle, always cross-reference your full vehicle identification number (VIN) or vehicle registration plate against the factory part number 1K0941700C prior to finalizing your order.

How It Works

A front fog light operates independently of the main beam headlights. Positioned low down in the front bumper fascia, the 1K0941700C lamp assembly projects a wide, flat, and horizontal bar of light directly onto the road surface ahead. Because fog typically hovers a few inches above the ground, this low-slung placement allows the light beam to illuminate road markings and kerbs without reflecting off moisture droplets into the driver’s eyes.

Due to their low placement on the vehicle, front fog lights face constant exposure to harsh road conditions. Common wear indicators and failing symptoms include:

• Stone chip damage causing deep cracks or holes in the outer protective lens.

• Internal condensation or pooling water inside the lamp housing, indicating a failure of the perimeter moisture seals.

• Corrosion or oxidation on the rear electrical terminal pins, causing the bulb to flicker or fail to illuminate entirely.

• Yellowed, dull, or faded reflector backing material that significantly dims the light output.

Performance Benefits

• Enhanced Poor-Weather Safety: Maximizes forward visibility during dense fog, heavy downpours, and winter blizzards, reducing reaction times.

• Flawless MOT Compliance: Eliminates the risk of an MOT failure due to cracked lenses, insecure lighting mountings, or non-functional safety lamps.

• Precise Beam Pattern Control: Factory-engineered optics eliminate stray light scatter, preventing oncoming drivers from being blinded on narrow country lanes.

• Weatherproof Environmental Seal: High-grade silicone perimeter seals keep water spray, road salt, and dirt away from the internal bulb housing.

• Long-Term Durability: Engineered to withstand consistent thermal shock from cold external rain hitting a hot lamp lens during operation.

Build Quality & Engineering

Volkswagen OEM-grade lighting components are manufactured to strict European regulatory and safety standards. The outer lens of the 1K0941700C fog light is molded from heavy-duty, impact-resistant polycarbonate treated with an anti-UV coating to resist yellowing or clouding from prolonged sunlight exposure.

The rear housing is cast from heat-resistant composite polymers that won’t warp or degrade over years of engine bay heat cycles. Furthermore, the internal reflector uses highly polished, vacuum-metallized aluminum plating to maximize lumen output from standard bulbs, ensuring performance that cheap aftermarket copies cannot match.

Installation & Maintenance

Replacing a front bumper fog light is a straightforward, beginner-to-intermediate DIY task requiring basic hand tools.

1. Turn off the ignition, apply the handbrake, and isolate the vehicle’s lighting circuit.

2. Depending on your specific model, access the rear of the lamp either by unclipping the plastic front bumper outer grill trim or by loosening the front section of the inner wheel arch liner.

3. Extract the retaining screws fixing the old fog light housing to the internal bumper mounting bracket.

4. Carefully pull the lamp forward, depress the locking tab on the factory wiring loom connector, and pull the plug free.

5. Inspect the wiring plug for corrosion; clean with electrical contact cleaner if necessary.

6. Connect the wiring plug to the new 1K0941700C fog light until it clicks into place.

7. Slide the new lamp assembly into the bumper alignment slots, secure it tightly with the original screws, and snap the outer trim grill back into place.

8. Perform a stationary lighting test to confirm proper operation and adjust the manual vertical alignment screw if required.

Durability & Storage

Our genuine Volkswagen lighting inventory is housed in highly secure, dry, and climate-controlled warehouse spaces. This completely eliminates the risk of ambient humidity degrading the internal chrome finish or cracking the rubber sealing boots before installation. Each fog light arrives individually boxed in robust original packaging designed to prevent any transit scratching or lens fracturing during courier distribution.

Trust & Authenticity

When purchasing vehicle lighting, cheap unbranded components often use brittle plastics that crack at the first minor impact, poor-quality seals that let in water within weeks, and misaligned mounting pins that make installation frustrating.

At Volkswagen Parts US, we supply authentic original equipment components. Purchasing a genuine 1K0941700C guarantees a factory-level fit, standard electrical safety, fully transparent trade pricing, fast shipping across the US, and reliable support from a team that understands your vehicle.

Why Choose Volkswagen Parts US for 1K0941700C

• 100% Authentic Factory Stock: Verified OEM components built exactly to your vehicle’s factory blueprint.

• Perfect Bumper Fitment: Fits original mounting points and wiring sockets perfectly without modification.

• Competitive US Pricing: Main dealer component quality at competitive prices for motorists and trade mechanics.

• High Stock Availability: Maintained in high volumes in our central US facility to enable immediate order dispatch.

• Secure and Encrypted Checkout: Fully compliant payment gateways safeguard your personal and payment details.

Fast Delivery Across the US

A broken or cracked fog lamp leaves your vehicle vulnerable to water ingress and MOT failure. We offer rapid, fully trackable courier shipping across California, San Diego, Dallas, and Florida to get your replacement to you as quickly as possible.

We offer reliable shipping options directly to homes, businesses, and workshops in major US towns and cities, including:

• New York

• Los Angeles

• Chicago

• Texas

• Houston

• Phoenix

• Philadelphia

• Florida

• North Carolina

• Illinois

• Pennsylvania

• Georgia

• Georgia,

• Michigan

• Ohio

Get automated dispatch emails and live courier tracking links delivered straight to your device to keep you updated from checkout to delivery.

Genuine Volkswagen Parts for US Drivers

Choosing original factory parts is the most effective way to protect your car’s safety profile, reliability, and resale value. Genuine lighting parts guarantee proper electrical resistance across your factory wiring loom, reducing the risk of dashboard warning lights, blown fuses, or faulty bulb warnings. Keep your vehicle performing exactly as intended by choosing lighting components engineered specifically for US driving conditions.